Thermal Transfer Systems M3-VG - Manual (Page 10)

How to contact Alfa Laval
Contact details for all countries
are continually updated on our website.
Please visit www.alfalaval.com to
access the information directly.
ENSR00004USEN 0206 All rights reserved for changes in specifications
Working principle
Channels are formed between the plates and the corner ports
are arranged so that the two media flow through alternate
channels. The heat is transferred through the plate between
the channels, and complete counter-current flow is created
for highest possible efficiency. The corrugation of the
plates provides the passage between the plates, supports
each plate against the adjacent one and enhances
the turbulence, resulting in efficient heat transfer.
Standard materials
Frame plate
Mild steel, Epoxy painted
Nozzles
Carbon steel
Lined: Stainless steel, Titanium
Plates
Stainless steel: AISI 304, AISI 316
Titanium
Alloy C-276
Alloy 254 SMO
Gaskets (Clip-on/Tape-on,Glued)
Nitrile
Nitrile hydrogenated
EPDM Viton ® G
AL-EPDM
Connections
FML Size 6" ANSI 150
FG Size 6" ANSI 150
FD Size 6" ANSI 300
FS Size 6" ANSI 300
Technical data
Max.working pressure
FML
150 psig/320 o F (Non-ASME)
FG 150 psig/320 o F
FD 300 psig/320 o F
FS 460 psig/320 o F
Maximum heat transfer surface
4,200 sq.ft
Dimensions
Measurements (mm)
Type H W h
M15-FML 71.5" 24" 10.83"
M15-FG 76.4" 25.6" 10.83"
M15-FD 80.1" 25.6" 14.57"
M15-FS 80.1" 25.6" 14.57"
The number of tightening bolts may vary depending on pressure rating.
Particulars required for quotation
– Flow rates or heat load
– Temperature program
– Desired working pressure
– Maximum permitted pressure drop
– Available steam pressure
Flow principle of a plate heat exchanger
44" – 128"
11.7"
50.9"
2.2"
THERMAL TRANSFER SYSTEMS, INC.
[email protected]
PH: 800-527-0131 FAX: 972-242-7568