TerraWave GTRM 100 KIT V3.0 - Manual (Page 30)

30
Enter the IP Address of your PC or Laptop in the Value field and click OK
Note: In order to receive SNMP messages the GTRM and the associated PC or Laptop must be on the
same network or be able to communicate across networks. Verify connectivity by pinging the GTRM
with your PC or laptop. If you receive a reply you should be able to receive SNMP messages.
If your entry was successful you will see a SET succeeded window.
Cannot bind to port 162 Error Message
Depending on your computer configuration you may get an error message pop up that says that you
cannot bind to port 162. SNMP uses port 162 and sometimes Windows has an active SNMP server
running that is using port 162. If you get this message you will need to follow the steps below to kill the
process using the port.