Regency CI2600 Large Wood Insert - Manual (Page 30)

CI2600/HI400 | wood insert
30 | maintenance
BYPASS DOOR GASKET REPLACEMENT
1. Remove Bypass Rod - turn counter clockwise.
2. The following parts must be removed to allow access and a positive connection.
a) Primary
Air Shield
b) Combustor Flame Shield
c) Combustor
d)
Upper shield
Bypass Rod
A -Primary Air Shield - loosen 2 x 7/16"
bolts - slide forward to remove.
B- Combustor Flame Shield - loosen 2 x 7/16"
bolts to remove.
D - Combustor- remove with pliers
Tilt down and forward to ease removal.
E - Upper Shield - slide forward and lift up to remove.
3. Lift off bypass plate, remove bypass gasket and replace with a new one.
Bypass plate
Bypass gasket