Regency CI2600 Large Wood Insert - Manual (Page 19)

CI2600/HI400 | wood insert
| 19 installation
CAST FACEPLATE INSTALLATION
4. Install the left and right of the fascia panels using four 7/16’’ bolts.
3. Install two brackets to the back of each side panel with four 7/16’’ bolts.
Fascia side panels installed with Bolts
NOTE: Fan cassette must be installed prior to this step. See fan install
instructions.
Remove unit door prior to installation of faceplate.
Remove all contents from the package and lay out.
1. Install tool and handle holder to the left side of the unit with on - 7/16"
bolt as shown below. (Note: part is packed with the manual package).
Handle / Tool holder
Brackets with Bolts
2. Install the upper left and right brackets using the four 7/16" bolts.
Rail system secured w/bolts
5. Attach the left and right side rails to the back of the bottom fascia panel
using four 7/16’’ bolts.