Regency CI2600 Large Wood Insert - Manual (Page 20)

CI2600/HI400 | wood insert
20 | installation
Back view of Top Fascia Panel lining up with the
brackets installed in Step 1
7. Remove the ring on the bypass rod by turning counter clockwise and
pull bypass rod forward to the open position. Then take the top fascia
panel and gently slide the bypass rod through the hole in the fascia
panel. Lift the fascia panel up slightly - push back to engage the brack-
ets installed on step 1.
Note: If installing optional cast grill - follow installation instructions in this
manual.
Completed Optional Hampton Cast Faceplate
8. Re-install bypass ring and door.
Rail System
6. Take the bottom fascia and line up the wheels and rails with the rails on
the unit. Once lined up lift up and into the rail system and slide into position.