Regency CI2600 Large Wood Insert - Manual (Page 13)

CI2600/HI400 | wood insert
| 13 installation
OPTIONAL CAST GRILL INSTALLATION
GLASS REMOVAL TO INSTALL
OPTIONAL DOOR CAST GRILL
1. To remove the glass, loosen the two 7/16" bottom retainer bolts
but do not remove.
2. Remove the sides and top retainer and bolts highlighted in the
diagram and carefully remove glass, it will fall towards you at the top.
3. Place the grill in the door, make sure that the glass gasketing on the
left and right bracket is facing you.
4. Carefully place the glass (black strip up) into the bottom retainer.
Keeping it in place, re-install the sides and top retainer and bolts.
Do not tighten bolts, fi nger tight only.
5. Lift the bottom of the glass upwards till it stops, secure glass retainer
using the 8 bolts. Do not wrench down on the bolts, as this may cause
the glass to break.
Remove 6 - 7/16" Bolts
Avoid impact on glass doors such
as striking or slamming shut.
FIREBRICK ASSEMBLY
Firebrick is included to extend the life of your insert and radiate heat more evenly. Check to see that all
fi rebricks are in their correct positions and have not become misaligned during shipping.