Regency Classic C34 Small Gas Stove - Manual (Page 32)

32
Regency ® CLASSIC C34-3 Direct Vent Freestanding Gas Stove
INSTALLATION
WIRING DIAGRAMS
This heater does not require a 120V A.C. sup-
ply for operation. In case of a power failure, the
burner switch and the optional remote control/
thermostat will continue to operate.
However, a 120V A.C. power supply is needed
for the fan/blower operation.
CAUTION: Ensure that the wires
do not touch a hot surface and
are away from sharp edges.
WARNING:
Electrical Grounding
Instructions
This appliance is equipped with
a three pronged (grounding)
plug for your protection against
shock hazard and should be
plugged directly into a properly
grounded three-prong recepta-
cle. Do not cut or remove the
grounding prong from this plug.
For NATURAL GAS Units and Units NOT Equipped with DC Spark Boxes