Summit TDC111V Service Manual - Manual (Page 37)

Instructions Illustration
6. Carefully pull the programme
selector from the panel.
7. Use a screwdriver to free the
control card from the panel. NOTE!
The control card must be placed in
an ESD-safe bag.
8. Check that the push button, lens
and decorative inlay are in place.
Now carefully press the new control
card into place.
9. Attaching the panel: Attach
all wiring to the appropriate
connectors on the control card.
Angle the panel outwards and
place the mounting plates in the
corresponding grooves in the front
frame. Angle the panel downwards
and secure it with the catches
Note: Be careful not to damage the
wiring!
10. Screw the top cover into place.
Service and installation
Replacing the panel and the control unit
Service Manual TD70.C
37