Robustel W800 - Manual (Page 54)

Robustel GoFixed W800 User Guide
RT_W800_UG_v02.00
04.11.2011 Page 53 /59
Confidential
3.12.5 Update Software
Please go to path: Tools ‐> Update Software page. Click Browse to choose the right software. Then click Update
Software to update.
The power LED will go red to indicate that the software upgrade is in progress. Once complete the unit will
automatically restart with the new software. The current software version can be viewed by going to path Status ‐>
Basic Info
Attention: please make sure the power to the device is not interrupted during the software updating process. Also,
the RJ45 cable should be connected tightly between the PC and device during the software uploading process.
Once updated, please press the reset button or go to path: Tools ‐> Factory Settings to restore the device to the new
factory default settings if necessary.
3.12.6 Factory Settings
To restore the GATEWAY to the factory default configuration either press the Reset button on the side of the unit or
go to path Tools ‐> Factory Settings and click the Restore Default Settings button.