Robustel W800 - Manual (Page 38)

Robustel GoFixed W800 User Guide
RT_W800_UG_v02.00
04.11.2011 Page 37 /59
Confidential
A default PPTP tunnel is automatically created for each available WAN interface. Click the Edit button to configure the
tunnel:
z Tunnel Name‐‐ specify a name to identify the tunnel.
z Ip Address or Domain Name ‐‐‐ specify the IP Address or FQDN for the remote PPTP Network Server.
z PNS Username ‐ ‐specify the username required to login to the remote PPTP Network Server.
z PNS Password ‐ ‐specify the password required to login to the remote PPTP Network Server.
z Enable‐‐‐ set to use to start using the PPTP tunnel.
z Use Default Gateway on the Remote Network‐‐‐ set to yes to forward traffic to the remote gateway.
z Authentication Method ‐‐‐select the authentication method required to login to the PNS (PAP/CHAP/MSCHAP)
or set to AUTO for the authentication method to be determined automatically.
z Use Static IP Address‐‐‐select to specify the IP Address manually.
Set the required options and then click the Apply button