6 network, 1 3g configuration (wan device/wan service) – Robustel W800 User Manual
Page 26
Robustel GoFixed W800 User Guide
RT_W800_UG_v02.00
04.11.2011
Page 25 /59
Confidential
Check the Summary screen and then click Apply/Save to enable the connection.
The Quick Setup wizard is now complete. Refer to the following sections for a complete description of all of the
available options.
3.6 Network
3.6.1 3G Configuration (WAN Device/WAN Service)
Please go to Network interface to select the WAN Service. Users can either edit a 3G network or an ADSL network.
Note: please power off the Gateway before inserting the SIM card.
Please go to path: Network ‐> WAN Device page. Check the Enable Automatic 3G backup, and configure the time
out all DSL link down to run 3G – the value here is used to determine the time interval for using 3G after DSL link is
down. Then click Apply/Save.