Robustel W800 - Manual (Page 44)

Robustel GoFixed W800 User Guide
RT_W800_UG_v02.00
04.11.2011 Page 43 /59
Confidential
can be ACCEPTED by setting up filters. Please go to path: Firewall ‐> IP Filters ‐> Incoming IP Filtering Setup.
Click Add button to configure incoming IP filters. The following interface allows user to create a filter rule to identify
incoming IP traffic by specifying a new filter name and at least one condition. All of the specified conditions in this
filter rule must be satisfied for the rule to take effect. Click Apply/Save to save and activate the filter.
By default, all outgoing IP traffic from LAN is allowed, but some IP traffic can be BLOCKED by setting up filters.
Please go to path: Firewall ‐> IP Filters ‐> Outgoing IP Filtering Setup.
Click Add button to configure outgoing IP filters. The following interface allow user to create a filter rule to identify
outgoing IP traffic by specifying a new filter name and at least one condition. All of the specify conditions in this filter
rule must be satisfied for the rule to take effect. Click Apply/Save to save and activate the filter.