Robustel W800 - Manual (Page 41)

Robustel GoFixed W800 User Guide
RT_W800_UG_v02.00
04.11.2011 Page 40 /59
Confidential
WARNING: Changing the mode takes immediate effect and so may disconnect any connected Wireless clients.
MAC Restrict Mode – select from the following:
z Disabled – all MAC Addresses will be allowed to connect.
z Allow – only MAC addresses listed below will be allowed to connect.
z Deny – all MAC Addresses will be allowed to connect EXCEPT those listed below.
Use the Add button to add MAC addresses to the list.
3.8.5 WLAN Bridge
Go to path WLAN ‐> WLAN Bridge
Use this page to configure Wireless Bridging functionality. Wireless Bridging allows a Wi‐Fi network to be extended
to cover a larger area through the use of multiple Wi‐Fi bridge devices.
AP Mode:
z Access Point ‐ The gateway can be used as both a Wireless Access Point and a Wireless Bridge (default).
z Wireless Bridge – The gateway can be used as a Wireless Bridge only.
Bridge Restrict:
z Enabled ‐ only Wireless Bridges whose MAC Addresses are entered below may connect.
z Disabled ‐ any Wireless Bridge may connect.
Remote Bridges MAC Address – enter MAC Addresses for remote bridges which are permitted to connect when
“Bridge Restrict” option is enabled.
Enter the required settings and then click the Apply/Save button.