Robustel W800 - Manual (Page 37)

Robustel GoFixed W800 User Guide
RT_W800_UG_v02.00
04.11.2011 Page 36 /59
Confidential
z IPSec Connection Name‐‐‐‐ specify a name to identify the tunnel.
z Remote IPSec Gateway Address‐‐‐‐ specify the IP address or FQDN for the remote end of the tunnel, this should
be the internet IP address for the remote gateway.
z Tunnel access from local IP addresses ‐‐‐‐ specify the IP address or subnet for the local side of the IPSec tunnel.
z Tunnel access from remote IP addresses‐‐‐specify the IP address or subnet for the remote side of the IPSec
tunnel.
z Key Exchange Method‐‐select Auto to use the standard Internet Key Exchange (IKE) method or Manual to specify
the encryption and authentication keys manually.
z Authentication Method‐‐only Pre‐Shared Key is supported.
z Pre‐Shared Key ‐‐ enter the Pre‐Shared Key.
z Perfect Forward Secrecy‐‐‐‐ select whether to use the Perfect Forward Secrecy (PFS) method.
Fill in the required options and then click the Apply/Save button.
3.7.4 VPN (PPTP Config)
Go to path Application ‐> PPTP Config