Robustel R3000 Lite User Guide - Manual (Page 74)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 73 / 113
Confidential
Advanced
Address/Control
Compression
Used for PPP initialization. In general, you need to enable it as default. Enable
Protocol Field
Compression
Used for PPP initialization. In general, you need to enable it as default. Enable
Asyncmap Value
One of the PPTP initialization strings. In general, you don’t need to modify
this value.
ffffffff
MRU
Maximum Receiving Unit. It is the identifier of the maximum size of packet,
which is possible to receive in a given environment.
1500
MTU
Maximum Transmission Unit. It is the identifier of the maximum size of
packet, which is possible to transfer in a given environment.
1436
Link Detection Interval
Specify the interval between PPTP client and server.
To check the connectivity of a tunnel, the client and server regularly send PPP
Echo to each other. If the client or server receives no response from the peer
within a specified period of time, it retransmits the PPP echo. If it receives no
response from the peer after transmitting the PPP echo for max retries times,
it considers that the PPTP tunnel is down and tries tore-establish a tunnel
with the peer.
30
Link Detection Max
Retries
Specify the max retries times for PPTP link detection. 5
Expert Options
You can enter some other PPP initialization strings in this field. Each string
can be separated by a space. noccp
nobsdcomp
Route Table List Click “Add” to add a route rule from PPTP server to PPTP client. Null
3.24 Configuration -> SNMP
This section allows users to set the SNMP parameters.
Basic @ SNMP
Item Description Default