Robustel R3000 Lite User Guide - Manual (Page 45)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 44 / 113
Confidential
USB
Item Description Default
Enable automatic update
of configuration Click Enable to automatically update the configuration file of R3000 when
insert the USB storage devices which has R3000’s configuration file.
Disable
Enable automatic update
of firmware Click Enable to automatically update the firmware of R3000 when insert the
USB storage devices which has R3000’s firmware.
Disable
3.14 Configuration -> NAT/DMZ
This section allows users to set the NAT/DMZ parameters.
Port Forwarding @ NAT/DMZ
Item Description
Defaul
t
Port Forwarding
Manually defining a rule in the router to send all data received on some range
of ports on the internet side to a port and IP address on the LAN side.
Null
Remote IP Set the remote IP address. Null
Arrives At Port The port of the internet side which you want to forward to LAN side. Null
Is Forwarded to IP
Address
The device’s IP on the LAN side which you want to forward the data to. Null
Is Forwarded to Port The device’s port on the LAN side which you want to forward the data to. Null
Protocol Select from “TCP”, “UDP” or “TCP&UDP” which depends on the application. TCP