Robustel R3000 Lite User Guide - Manual (Page 44)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 43 / 113
Confidential
serial data can be matched to this local IP address and be transmitted or
received via VPN tunnel.
Note: when you do not enable any VPN tunnel, this item will not show up.
Local Port @ Modbus Enter the Local port for Modbus. 0
Attached serial device
type @ Modbus
Select From “Modbus RTU slave”, “Modbus ASCⅡ slave”, “Modbus RTU
master” and “Modbus ASCⅡ master”.
Modbus RTU slave: router connects to slave device which works under
Modbus RTU protocol.
Modbus ASCⅡ slave: router connects to slave device which works under
Modbus ASCⅡprotocol.
Modbus RTU master: router connects to master device which works under
Modbus RTU protocol.
Modbus ASCⅡ master: router connects to master device which works
under Modbus ASCⅡ protocol.
Modbus
RTU slave
Modbus Slave @
Modbus
Add the Modbus slaves which will be polled by Modbus master (router). This
section only displayed when you select “Modbus RTU master” or “Modbus
ASCII master” in “Attached serial device type”.
Null
Slave Address @
Modbus Slave
This connection is usually used to connect to the Modbus slave devices
which as TCP server. Enter IP address of the TCP server.
Null
Slave Port @ Modbus
Slave
Enter the port number of TCP server. Null
ID @ Modbus Slave Enter the ID number of TCP server. Null
Interval Timeout @
Transparent
Over
Rlink
Serial port will queue the data in buffer and then send it to the Cellular
WAN/Ethernet WAN when it reaches the Interval Timeout in this field.
10
Attached serial device
type @ Modbus Over
Rlink
Select From “Modbus RTU slave”, “Modbus ASCⅡ slave”.
Modbus RTU slave: router connects to slave device which works under
Modbus RTU protocol.
Modbus ASCⅡ slave: router connects to slave device which works under
Modbus ASCⅡprotocol.
Modbus
RTU slave
3.13 Configuration -> USB
This section allows users to set the USB parameters.
Note: Users can insert an USB storage device, such as U disk and hard disk, into the router’s USB interface. If there is
configuration file or firmware of R3000 Lite inside the USB storage devices, R3000 Lite will automatically update the
configuration file or firmware. We will provide another file to show how to do USB automatic update.