Robustel R3000 Lite User Guide - Manual (Page 71)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 70 / 113
Confidential
PPTP Client @ PPTP
Item Description Default
Add Click “Add” to add a PPTP client /
Enable Enable PPTP Client. The max tunnel accounts are 3. Null
Disable Disable PPTP Client. Null
Remote IP Address Enter your PPTP server’s public IP or domain name. Null
Username Enter the username which was provided by your PPTP server. Null
Password Enter the password which was provided by your PPTP server. Null
Authentication
Select from “Auto”, “PAP”, “CHAP”, “MS-CHAP v1” and “MS-CHAP v2”.
You need to select the corresponding authentication method based on the
server’s authentication method. When you select “Auto”, router will auto
select the correct method based on server’s method.
Auto
Enable NAT Click to enable NAT feature of PPTP. Disable
Enable MPPE
Tick to enable MPPE (Microsoft Point-to-Point Encryption). It’s a protocol for
encrypting data across PPP and VPN links.
Disable
All traffic via this
interface
After click to enable this feature, all data traffic will be sent via PPTP tunnel. Disable
Show Advanced Tick to enable the PPTP client advanced setting. Disable