Robustel R3000 Lite User Guide - Manual (Page 46)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 45 / 113
Confidential
DMZ @ NAT/DMZ
Item Description Default
DMZ
DMZ host is a host on the internal network that has all ports exposed, except
those ports otherwise forwarded.
Null
Enable DMZ Select to enable the DMZ function. Enable
DMZ Host Enter the IP address of the DMZ host which on the internal network. 0.0.0.0
Source Address Set the address which can talk to the DMZ host. Null means for any addresses. 0.0.0.0
3.15 Configuration -> Firewall
This section allows users to set the firewall parameters.
Basic @ Firewall
Item Description Default
Remote Access Using
HTTP
Enable to allow users to access the router remotely on the internet side via HTTP. Enable
Remote Access Using
TELNET Enable to allow users to access the router remotely on the internet side via
Telnet.
Enable
Remote Access Using
SNMP Enable to allow users to access the router remotely on the internet side via
SNMP.
Enable
Remote Ping Request Enable to make router reply the Ping requests from the internet side. Enable
Defend Dos Attack Enable to defend dos attack. Dos attack is an attempt to make a machine or Enable