Robustel R3000 Lite User Guide - Manual (Page 111)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 110 / 113
Confidential
R3000> enable
Password: *****
R3000#
R3000# tftp 172.16.3.3 get rootfs R3k.1.01.01-sub-131211.01.fs
Tftp transfering
tftp succeeded!downloaded
R3000# write //save current configuration
Building configuration...
OK
R3000#reload
!Reboot the system?'yes'or 'no':yes //reload to take effect
Example 3: Set IP address for Eth0
R3000> enable
Password: *****
R3000 # configure
R3000 (config) # set eth0
ethernet interface type: LAN
->IP address [192.168.0.1]:172.16.1.231 //set IP address for eth0
->Netmask [255.255.255.0]:255.255.0.0
->mtu value (1024-1500)[1500]:
this parameter will be take effect when reboot!
really want to modify[yes]:
R3000 (config) # end
R3000# write //save current configuration
Building configuration...
OK
R3000 # reload
! Reboot the system? 'yes' or 'no': yes //reload to take effect
Example 4: CLI for Cellular dialup
R3000> enable
Password: *****
R3000# configure
R3000 (config) # set cellular
1. set SIM_1 parameters
2. set SIM_2 parameters
->please select mode (1-2)[1]:
SIM 1 parameters: