Robustel R3000 Lite User Guide - Manual (Page 109)

Robustel GoRugged R3000 Lite User Guide
RT_UG_R3000 Lite_v.1.0.0 23.12.2013 108 / 113
Confidential
PRIVILEDGED EXEC MODE:
R3000> enable
Password: ***** //type “admin”
R3000# ? //check what commands can be used in Privileged exec mode
debug Debug configure information
enable Turn on privileged commands
exit Exit from current mode
export Export file using tftp
syslog Export system log
import Import file using tftp
load Load configure information
ping Ping test
reload Halt and perform a cold restart
telnet Startup a telnet client shell
module-at module at test
sniffer catch network traffic
tracert Tracert test
write Write running configuration
wpadebug set wpa_supplicant debug level
tracert Tracert test
write Write running configuration
tftp Copy from tftp: file system
show Show running system information
configure Enter configuration mode
end Exit to Normal mode
GLOBAL CONFIGURATION MODE:
R3000# configure
R3000(config)# ? //check what commands can be used in global configuration mode
exit Exit from current mode
end Exit to Normal mode
interface Configure an interface
set Set system parameters
add Add system parameters list
modify Modify system parameters list
delete Delete system parameters list