RKI Instruments SC-01 - Manual (Page 64)

64 • Changing SC-01 Instrument Parameters
5. Click the Set button to display the Set window. Use the SC-
01 Status frame to change parameters stored in the SC-01.
6. To change the serial number or user ID stored in the SC-01,
click the field you wish to change (e.g., user ID), use the
backspace key to remove the current entry, then type the
new information.
7. To change the datalogging interval trend time, click on the
down arrow in the Interval Trend Time field and select the
desired interval trend time in seconds. The available choices
are 10, 20, 30, 60, 180, 300, and 600 seconds.
Figure 55: Set Window
Click to
upload
changes to
GX-2003