RKI Instruments SC-01 - Manual (Page 5)

Introduction • 5
Introduction
Using an advanced microprocessor controlled detection system,
the SC-01 Personal Single Gas Monitor detects the presence of
one of a variety of toxic gasses depending on the sensor
installed. The SC-01’s compact size and easy-to-use design
makes it ideally suited for a wide range of applications as
described in the SC-01 Operator’s Manual, which you should
read first before using the SC-01 Data Logger Management
Program.
The SC-01 Data Logger Management Program downloads data
stored in the SC-01 to a Windows-based PC. After the data has
been downloaded, you can view, save, or print it using your
computer and the SC-01 Data Logger Management Program.
The purpose of this manual is to explain how to use and set up
the SC-01 Data Logger Management Program. You will learn
how to:
• install and launch the program
• install the downloading cable (if needed)
• download data from the SC-01
• view, print, and export, and delete data
• change data logging parameters
• change the appearance of the program screens
• change the color of graphed readings for a particular gas
Before you get started, be sure to review the system
requirements in the next section.
WARNING: The SC-01 detects toxic gases which can be
dangerous or life threatening. When using the
SC-01, you must follow the instructions and
warnings in the SC-01 Operator’s Manual to
assure proper and safe operation of the unit
and to minimize the risk of personal injury.