BT 1020 - Manual (Page 62)

Using additional handsets
62
Hub Phone 1020 – Issue 3 – Edition 1 – 05.10.07.07 – 8423 H
Internal calls
Making internal calls
You can make internal calls between two BT Hub phone handsets
that are registered to your hub. This can only occur if there are no
other calls in progress on additional handsets. Once an internal
call is in progress all other handsets will show
LINE IN USE
.
1. Press INT .
2. Enter the other handset number using the keypad
(e.g.
). The called handset will ring and show the calling
handset’s number.
If there is no response, press to end the call at your
handset.
Receiving internal calls
1. When the handset rings, press to answer.
2. Press to end the call.
62
If an incoming call is received whilst
you are on an internal call you hear
Call Waiting beeps. If you end the
internal call, all the handsets will then
start to ring and show the Caller
Display for the incoming call.
8423 Hub Phone 1020 Iss.3 [1] 12/10/07 12:26 Page 62