BT 1020 - Manual (Page 25)

Switching the handset power on/off
Press and hold .
Press and hold to switch the handset back on again.
Make an external call
1. Press listen for the dial tone then dial the number.
Preparatory dialling (pre-dial)
To see the number on the display before dialling use pre-dial.
Pre-dial numbers can be up to 20 digits long.
1. In standby, enter the number you want to dial.
2. Press to dial.
End a call
1. Press or place the handset back on the charger cradle.
If auto talk option is on.
Dialling numbers quickly
Numbers can also be dialled in
Handsfree mode (page 26), using the
phonebook (page 35), and from the
calls list (page 40).
When using BT Broadband Talk you
need to use the full dialling number.
If you make a mistake, press Clear
to delete the last digit.
Using the phone
25
Hub Phone 1020 – Issue 3 – Edition 1 – 05.10.07.07 – 8423
8423 Hub Phone 1020 Iss.3 [1] 12/10/07 12:25 Page 25