BT 1020 - Manual (Page 61)

4. Press the wireless association button. After 3 seconds the
phone LED starts to flash.
5. Press OK on the handset.
6. The display shows
REGISTERING HANDSET. PLEASE WAIT
.
You should then get confirmation that the handset is
registered.
The handset will automatically be allocated the next available
handset number which will be displayed when in standby mode.
Using additional handsets
61
Hub Phone 1020 – Issue 3 – Edition 1 – 05.10.07.07 – 8423
If your handset is already registered to
a base, the
*
symbol will be shown to
the right of the base number.
If there are already 5 handsets
registered to the base you will hear a
double beep.
Each digit of the PIN code will be
displayed as a
*
for security reasons.
Press Clear if you enter an
incorrect digit.
If you enter the wrong PIN code you
will hear a double beep.
8423 Hub Phone 1020 Iss.3 [1] 12/10/07 12:26 Page 61