RKI Instruments Data Cal 2000 - Manual (Page 49)

Bump Testing Instruments • 44
If the instrument or instruments failed the bump test, then the
following indication is given.
5. If the Force Calibration box is checked, then the Data Cal 2000 will
automatically calibrate any instrument or instruments that failed the
bump test.
6. To close the result window, click the OK button. For a failed bump
test, if you want to view the test results for each channel, double
click on an instrument in the result window and the software will
take you to the Bump Test area of the Logs window where the data
for this bump test is saved.
7. After a bump test, the docking modules and instruments will be
automatically displayed in detail format.
Figure 24Bump Test Fail Indication