RaySafe Xi - Manual (Page 7)

the raysafe Xi Base unIt
there are two versions of the raysafe Xi base unit: one with and one without mA/mAs capabilities. Both
versions are fully compatible and interchangeable with the raysafe Xi detectors as long as the firmware
supports the detector (see specifications). In this manual all information refers to both versions unless
otherwise specified.
the raysafe Xi base unit automatically identifies the connected detector and displays the settings and
parameters available for that detector.
the built-in active compensation automatically applies corrections for different beam qualities, filtrations
and temperatures. during fluoroscopy, survey or light measurements the displayed values are continuously
updated. data is sent on the serial port, and raysafe Xi view, the program included with your raysafe Xi, shows
numerical data as well as waveforms on a pC.
7
raysafe Xi user Manual – the raysafe Xi