Brother DCP9040CN - Manual (Page 45)

Safety and legal
37
A
IEC60825-1+A2:2001 Specification
A
This machine is a Class 1 laser product as defined in IEC60825-1+A2:2001 specifications. The
label shown below is attached in countries where required.
Laser Diode
A
Wave length: 780 - 800 nm
Output: 30 mW max.
Laser Class: Class 3B
WARNING
Use of controls, adjustments or performance of procedures other than those specified in this
manual may result in hazardous radiation exposure.
Disconnect device
A
This product must be installed near an electrical socket that is easily accessible. In case of
emergencies, you must disconnect the power cord from the electrical socket to shut off the power
completely.
If moving your machine, use the handholds
provided. First making sure to disconnect any
cables. To prevent injuries when moving or lifting
this machine, make sure to use at least two people.
This machine has a Class 3B Laser Diode which emits invisible
laser radiation in the Scanner Unit. The Scanner Unit should not
be opened under any circumstances.
CLASS 1 LASER PRODUCT
APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT