Brother DCP9040CN - Manual (Page 141)

Menu and features
133
D
3.Printer
(continued)
7.Manual Regist. 1.Print Chart — Print the chart to manually
check the registration of
the colours. See
Software
User’s
Guide on
the
CD-ROM.
2.Set Regist. 1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow Right
Sets the correction value
on the chart you printed
out from Print Chart.
4.LAN 1.TCP/IP 1.BOOT Method Auto*
Static
RARP
BOOTP
DHCP
Chooses the BOOT
method that best suits
your needs. See
Network
User’s
Guide on
the
CD-ROM.
2.IP Address [000-255]. [000-255].
[000-255]. [000-255] Enter the IP address.
3.Subnet Mask [000-255]. [000-255].
[000-255]. [000-255] Enter the Subnet mask.
4.Gateway [000-255]. [000-255].
[000-255]. [000-255] Enter the Gateway
address.
5.Node Name BRNXXXXXX Enter the Node name.
6.WINS Config Auto*
Static
Chooses the WINS
configuration mode.
7.WINS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address
of the primary or
secondary WINS server.
8.DNS Server (Primary)
000.000.000.000
(Secondary)
000.000.000.000
Specifies the IP address
of the primary or
secondary DNS server.
9.APIPA On*
Off
Automatically allocates
the IP address from the
link local address range.
0.IPv6 On
Off*
Sets the IPv6 protocol On.
Main Menu Submenu Menu Selections Options Descriptions Page