MacDon R80 Rotary Disc - Manual (Page 39)

MAINTENANCE/SERVICE
Form # 169089
37
Model Year - 2009
7.3.2 Recommended Lubricants
• Your machine can operate at top efficiency
only if clean lubricants are used.
• Use clean containers to handle all
lubricants.
• Store in an area protected from dust,
moisture, and other contaminants.
IMPORTANT
Do not overfill the cutterbar when
adding lubricant. Overheating and
failure of cutterbar components may occur
if overfilled
CAPACITIES
LUBRICANT SPEC DESCRIPTION USE
13 Ft 16 Ft
High Temp. Extreme Pressure (EP2)
Performance With 1% Max Molybdenum
Disulphide (NLGI Grade 2).
Lithium Base
As
Required
Unless
Otherwise
Specified.
--
Grease
SAE Multi-
Purpose
High Temp. Extreme Pressure (EP)
Performance With 10% Max
Molybdenum Disulphide (NLGI Grade 2).
Lithium Base
Driveline
Slip-Joints
--
Traxon SAE
80W90*
High Thermal & Oxidation Stability.
API Service Class GL-5
Cutterbar
3.43 qts (U.S.)
(3.25 liters)
4.5 qts (U.S.)
(4.25 liters)
SAE 75W90*
API Service
Class GL-5
(SAE J2360
Preferred)
Fully Synthetic Gear Lubricant
Bevel
Gearbox
0.86 pints (U.S.) (0.4 liters)
Gear
Lubricant
NLGI 00 Synthetic EP
Conditioner
Gearbox
Lubricated For Life
* or equivalent
.