MacDon R80 Rotary Disc User Manual

Page 21

OPERATION

Form # 169089

Model Year - 2009

f. At the header, disconnect electrical connector by

turning collar counterclockwise and pulling
connector to disengage.

g. Disconnect the two drive couplers, and case

drain coupler on header.

h. Move hose bundle from header and locate on

tractor LH side with hoses in support (D).

i. Rotate lever (A) clockwise and push to engage

bracket.

j. Locate electrical harness through support (D)

and attach cap to electrical connector (E).

k. Move tractor platform back to closed position.
l. Detach header from tractor. Refer to the M150

& M200 Self-Propelled Windrower Operator’s
Manual for procedures for mechanically
detaching the header from the self-propelled
windrower.

6.5 TRANSPORTING

WINDROWER

Refer to M150 & M200 Self-Propelled
Windrower Operator’s Manual for transporting
headers when attached to the M150/M200
windrower tractor.

6.6 LIGHTS

The turn signal lights
and hazard lights,
which are mounted on
both ends of the
header, are activated
by switches in the M
Series windrower
tractor cab. Only the
16 ft model is
equipped with lights.