MacDon R80 Rotary Disc - Manual (Page 20)

OPERATION
Form # 169089
18
Model Year - 2009
g. At the header, disconnect electrical connector by
turning collar counterclockwise and pulling
connector to disengage.
h. Disconnect the two drive couplers, and case
drain coupler on header.
i. Move hose bundle from header and locate on
tractor LH side with hoses in support (D).
j. Rotate lever (A) clockwise and push to engage
bracket.
k. Locate electrical harness through support (D)
and attach cap to electrical connector (E).
l. Move tractor platform back to closed position.
m. Detach header from tractor. Refer to the M150
& M200 Self-Propelled Windrower Operator’s
Manual for procedures for mechanically
detaching the header from the self-propelled
windrower.
6.4.2 M150 – 13 FT
a. Move LH (cab forward) platform to rear of
tractor.
b. Disconnect the hydraulic coupler from tractor
valve.
c. Raise lever (A) and undo Velcro straps (B).
d. Move hose (C) to store on header.
e. Install caps on connectors and hose end if
equipped.
(continued next page)
D
A D
E
C
A
B