MacDon R80 Rotary Disc User Manual

Page 16

OPERATION

Form # 169089

Model Year - 2009

6.3 HEADER

ATTACHMENT

Refer to the M150 & M200 Self-Propelled
Windrower Operator’s Manual for procedures for
mechanically attaching the disc header to the
self-propelled windrower. Refer to the following
procedures for electrical and hydraulic
connections. The header drive hydraulic hoses
and electrical harness are located on the left
cab-forward side of the tractor.

6.3.1

M200 – 13 FT & 16 FT

6.3.1.1 TRACTOR

CONNECTIONS

a. Disengage and rotate lever (A) counter-

clockwise to fully up position.

b. Remove cap (B) securing electrical connector to

frame.

c. Move hose bundle (C) from tractor through hose

support (D) on header.

d. Route header return and pressure hose bundle

(E) through header support (D) to tractor, and
locate bundle above existing hose bundle (C) as
shown.

e. If grass seed header is being attached, route

converging drum hose bundle (F) through
header support (D) to tractor, and locate bundle
above existing hose bundles as shown.

f. Lower and lock lever (A).
g. Secure hose bundles with three cinch straps

(G).

h. Move tractor left side platform to open position.

i. Connect two hose bundle from header to middle

valve block as shown.

(continued next page)

RETURN

PRESSURE