Paxton Easyprox compact keypad - Manual (Page 9)

Page 9
The declaration of conformity is available on request. Contact details are provided at: http://paxton.info/596
1 10,000
1 100
5,000
1 sec 60 sec
1 3
0 °C 55 °C
50 mm 30 mm
60 mm 194 mm 30 mm
150 mm 194 mm 72 mm
Specifications
Min Max
Min Max Environment
Dimensions
Features
Waterproof
Width Height Depth
Door open time
Number of Card Packs
Silent operation
Number of Users
Access levels (Colour Zones)
Operating temperature - Battery limits
Yes
No
Battery Type
Typical Battery Life
30,000 operations
Paxton Battery Pack
Full System Reset
There are two possible methods:
1. Remove Easyprox from the door by removing the 4 securing screws on the rear lock assembly.
2. Remove the plastic access plate at the rear of the front lock assembly. (top two standoff screws)
3. Locate the reset push button at the lower right corner of the circuit board.
4. Hold the button down and press the power button on the front of the keypad. - The unit will beep 3 times.
5. Press and release the reset button 4 more times - The unit will beep and display a flashing GREEN LED.
6. Remove and replace the battery plug. - The unit will beep and display a flashing AMBER LED.
- IT NOW REQUIRES RE-ENROLLING.
7. Replace the access plate.
8. Refit the lock to the door with the 4 mounting screws.
- OR -
1. Wake up the unit by pressing the power button. 4. Present Enrolment card again.
2. Present Enrolment card. 5. Present Door open time card twice.
3. Present Door open time card twice. 6. WAIT FOR 5 SECONDS
The unit is returned to its Factory settings
and will require initialising again.
Read Range Keyfob Token
Vandal resistance Low
Reader/Keypad module (required space on door)
Total outside dimensions (includes handle clearance)
Number of PIN's