Paxton Easyprox compact keypad - Manual (Page 7)

Page 7
The external handle is only engaged once access has been granted. The inside handle is always engaged.
A valid user card will cause the Green LED to flash briefly and the handle will then engage. This time period
can be changed with the 'door open time' card but should be kept to a minimum to preserve battery life.
Normal Operation
Green flash
Red flash + low beep
Amber constant flashing
Red constant flashing
A valid user card has been presented and the handle is engaged
An invalid user card has been presented - No access granted
A valid user card has been presented - the handle is not horizontal and so the latch cannot release
The handle is being held down - The latch cannot relock
LED indications
Alarm Sounder
The alarm is activated when the door fails to re-lock itself. The alarm will sound for 60 seconds during
which time the unit will try to lock the door once every 10 seconds. After 60 seconds the unit will then
shut down. When the unit is woken up, it will immediately try to lock the door. If it fails, the alarm cycle
will start again. Failure to relock will substantially reduce battery life.
Door open time
1. Take the 'door open time' card from the starter pack.
2. Present the card to the reader. The reader will start beeping.
3. Wait for the required period you wish the door to remain open.
4. Present the card again at the end of the period to set the open time. The beeping will stop.
Silent operation
card
1. Take the silent operation function card from the starter pack.
2. Present the card to the reader. The reader will beep.
3. The reader is now in silent operation mode.
4. Present the card again to disable silent operation mode. The reader will beep twice.
1 2 3
4 5 6
7 8 9
* 0 #
1 2 3
4 5 6
7 8 9
* 0 #
1 2 3 4
BEEP!
BEEP!
BEEP!
FUNCTION CARD
silent operation
Present this card to silence the beeping noises made by the reader. Present this card again to re-enable the beeping noises
FUNCTION CARD silent operation
Present
this card to sile nce the beeping noises
made by
the reader.
Pres en t t his card
again to
re-enable the
be eping noises
FUNCTION CARD silent operation
Present
this card to sil
ence the
beeping
noises
made by
the reader. Presen t this card again
to
re-enable the
beeping noises
1 2 3
4 5 6
7 8 9
* 0 #
1 2 3
4 5 6
7 8 9
* 0 #
1 2 3 4
BEEP!
BEEP!
FUNCTION CARD
door open time card
The period that the door is unlocked for when a
valid token is presented is set as follows:
1. Present this card
2. Wait for the required period
3. Present this card again, the beeping will stop
FUNCTION CARD door
open time card
The period that
the doo r is unloc ked for when
a
va lid token is pre sen ted is set as follows:
1. Presen t this card
2. Wa it for the required
pe riod
3. Present this card aga in, the bee ping wi ll stop
FUNCTION CARD door open time
card
The per iod that th e door is unlocked
for when a
va lid token is pr esented is set a s follows:
1. Pr es en t th is card
2. Wait for the required period
3. Pre sen t this ca rd agai n, t he beeping will stop
1 2 3
4 5 6
7 8 9
* 0 #
1 2 3
4 5 6
7 8 9
* 0 #
BEEP!
BEEP!
2 3 4 1
Swiping or presenting
this card to the
rea der will
turn off
the green
LED .
Green cards
will not be allow
ed
access when
the reader's
LED is off .
Swipe or present the ca
rd again to
turn on the green LED
. Z one cards
enable access to
pa rts of the bu
ilding
to be restricted to
certain
card co
lours.
Green zo
ne card
Swiping or presenting
this card to the
rea der will
turn off
the green
LE D.
Green cards
will not be allowed
access when
the rea
der's LED is off .
Swipe or present the ca
rd again to
turn on
the green LED
. Z one ca
rds
enable access to pa
rts of t he building
to be restricted to
certain card
colours. Green zo
ne card
Swiping or
presenting
this card to the
rea der will turn of
f the green LED .
Green cards will not be a
llowed
access when the
reader'
s LED is of f.
Swipe or present
the card a gain to
turn on the green
LED . Z one cards
enable access
to parts of the building
to be rest
ricted to certa
in card colours. Green zo
ne card
Swiping or presenting this card to the reader will turn off the green LED. Green cards will not be allowed access when the reader's LED is off. Swipe or present the card again to turn on the green LED. Zone cards enable access to parts of the building to be restricted to certain card colours.
Green zone card
Colour zone
cards
1. You require a function card pack.
2. To bar green users from this door present the green zone card.
3. The LED's will briefly display the colour zones that are still active.
4. To reverse this process, present the green zone card again.
This may also be done with red and amber zone cards.