Paxton 12V DC PoE+ power supply in cabinet with Net2 plus - Manual

Page 1
10/05/2012
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
Technical Support
Layout
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
Paxton
Ins-30155 12V DC PoE+ power supply in cabinet with Net2 plus
1. Connect the network cable to PoE In.
2. The Power LED will illuminate if power is available on this data line.
3. The PoE+ LED will illuminate if the high power rating is available.
4. 12V DC power is available at the two output connectors.
5. Network data is available at 'Ethernet Out'
Installation
The PoE (Power over Ethernet) supply is designed to draw power from a network cable that is provided with a
remote PSE. (Power source equipment)
This unit splits Ethernet data from the DC voltage. The voltage is available at two power connectors as 12V DC
and the data is passed unaltered to the Ethernet Out port.
This allows a Net2 plus to receive its power and data over a single cable connection without the need for an
additional power supply.
Overview
V2
1
V0 V2
1
V0 V2
1
V0 U S
P
V0
INPUT AC 100-240V
50 / 60 Hz
1.2A
OUTPUT DC 13.8V 2A
PoE+ splitter
power supply
Supports:
IEEE 802.3 af
IEEE 802.3 at
12V 12V 0V
Out
Ethernet
Out
PoE
In
PoE+ Power
0V
Out
1 r ed
ae
R
: n o it
ua
C
yl no s re
da
er
C D V 2
1 ro
F
2 r ed
ae
R
+V out
Red LED
Amber LED
Green LED
Data/D0
Clock/D1
Media Detect
0V out
0V
+V out
Red LED
Amber LED
Green LED
Data/D0
Clock/D1
Media Detect
0V out
N.C.
N.O.
COM
N.C.
N.O.
COM
Alarm
12V
Green LED
Exit
0V st up
nI
st up tu
O
re
wo
P
0V
12V
Contact
0V
0V
Tamper
PSU
re
p ma
T/
U S P
tc
at no
C
no tt
u B ti
xE
2 yal
e R
1
yal
e R
Rx Tx
RS485 Network
CAT5 Cable Coding
nr G/ th
W
ra
ps r o
ne
er c S
ta
d
mo
r f s
er oc
el ba
c
ne
er G
gn r O/ th
W
eg
na r O
10/100 Ethernet
Server Connected
Server Link 100
10
End of Line T ermination
ON OFF
Net2 plus
PLACE SERIAL
NUMBER
LABEL HERE
Intruder Alarm
Set
es M
LABEL HERE LABEL HERE
http://paxton.info/107
123456
00-01-02-03-04-05
12345612
Expansion
e a
V0 mr
A
ne
S O C
. O.
N
Tamper Switch
Ethernet data
+12V DC
Combined data
and power
PSE (Power source equipment)
The PoE+ power supply can be used in the high power mode (see specification table) if the power source
equipment can detect this request for additional power.
This is achieved by the Paxton supply through a hardware indication (capacitance). It is not able to provide
this confirmation through software (DLL classification).
High power mode