Paxton Easyprox compact keypad - Manual (Page 4)

Page 4
This box can be used to write down the Programming Code for future reference.
Ensure that this information is stored in a secure place.
Choose a 6 digit Programming Code and load this into the unit as follows:
DO NOT USE 123456 - The default User Code (1234) will open
the door before the Programming Code had been fully entered.
6 digit
Programming Code
The default user code is now set to 1234
6 digit Programming
Code
You can now set up the user codes and features using the programming chart.
Example: - Setting a user code to unlock the door under Normal conditions.
Enter user code
4-8 digits
Re-enter
user code
4 8
Enter 6 digit
Programming
Code
Hold for 3 secs Normal
X
Single or multiple
codes
Silent operation
20 wrong keystrokes
= 60 second lockout
Door open time
(seconds)
Change
Programming Code
Set a
user code
Data Reset (except
Programming code)
OR One code only Multiple codes allowed
Silent Beep on
OFF ON
Enter time in seconds
(default = 03, max = 60)
Enter user code
4-8 digits
Re-enter
user code
Enter 6 digit
Programming
Code
= Delete
= Normal
= Toggle
Enter 6 digit
Programming
Code
Re-enter 6 digit
Programming
Code
6
OR
OR
X
2
4
6
OR
OR
2
2
2
2
3
4
5
6
9
8
6
6
9
START - Enter the 6 digit Programming Code and hold down a function key
for 3 seconds. - The unit beeps and the LED flashes faster.
Continue the key sequence to set the option - The keypad returns to operating mode.
Function keys
= Hold down for 3 secs
See PROXIMITY with TOUCHLOCK
1 Combined Card &
Keypad modes
INITIALISING A NEW SYSTEM
TOUCHLOCK MODE
Backlight OFF ON OR
2 0 6