Paxton Easyprox nano - Manual

Page 1
18/04/2013
Parts list
Tools List
Power Drill
Drill bits 10 mm, 25 mm
Philips screwdriver
Hacksaw for cutting bolts
Hammer / Mallet
Chisel 25 mm
Stanley knife
Adhesive tape
Pencil
Tape measure
8 mm spanner (supplied)
2 mm Allen key (supplied)
1) Front Lock Assembly
2) Rear Lock Assembly
3) Rubber Escutcheon x2
4) Left and Right Handles
5) Battery Pack
6) Tubular Mortice Lock
7) Spindle
8) 8 mm Conversion Sleeve
9) 2 mm Allen Key
10) 8 mm Spanner
11) Strike Plate Backbox
12) Strike Plate
13) Long Mounting Screws x4
14) Short Mounting Screws x4
This unit is for indoor use only.
Technical Support
Technical help is available: Monday - Friday from 07:00 - 19:00 (GMT)
Saturday from 09:00 - 13:00 (GMT)
01273 811011 [email protected]
Ins-30107 Easyprox nano
Documentation on all Paxton products can be found on our website - http://www.paxton.co.uk/
This wireless unit requires a Net2Air bridge to
communicate with the server PC.
1 2
6 7 8 9 10 11 12
13 14
3 4
5
Paxton
This unit requires Net2 v4.23 or later software.
Call Technical Support if you require advice.