Pavement Ends 51202 Replay - Manual (Page 5)

51202 pg 5 0612 Rev. B
Step Eleven
A
TTACH
T
OP TO
R
EAR
B
OW
Raise the header and bow slightly to allow you
to attach the rear bow fl aps, that are inside the
top above the rear window opening, to the rear
bow. Use the four (4) screws that were removed
in Step 5 to secure the fl aps to the bow.
Step Thirteen
S
ECURE
H
EADER TO
W
INDSHIELD
Close the header latches to secure the front of the
top to the windshield. Catch the hook in the loop in
the windshield frame and then close the lever over
it so that it lays fl at against the windshield frame.
Step Twelve
S
ECURE
C
ENTER
B
OWS
Wrap the hook and loop fl aps around the two
Bows in the center of the top.
Step Fourteen
S
ECURE
R
EAR
C
ORNERS
Pull down gently on the Rear Bow and work
the plastic sewn to the rear corners of the top
into the retainer on the vehicle.
Rear
Bow
Screw Flaps
to Rear Bow
View from inside vehicle
Wrap Flap around Bow and
Fasten Hook and Loop
Wrap Flap around Bow
and Fasten Hook and Loop
Windshield
Frame
Windshield
Header Latch
Close lever over top of hook to
lay fl ush with windshield frame
Catch hook
in loop
Pull down gently
on the Rear Bow
and slip plastic into
retainer