Pavement Ends 51202 Replay - Manual (Page 2)

51202 pg 2 0612 Rev. B
Tools Needed
Safety Glasses
Phillips Screwdriver
Masking Tape
Parts List
Fabric Top Qty - 1
Quarter Window, Right Qty - 1
Quarter Window, Left Qty - 1
Rear Window Qty - 1
Elastic Garter Qty - 2
Step One
R
EMOVE
Q
UARTER
W
INDOWS AND
R
EAR
W
INDOW
Remove the Quarter Windows and the Rear
Window. Remove the metal Tailgate Bar from the
bottom of the Rear Window and set it aside.
Release the plastic strip sewn to the top above the
doors. Pull down and out to slip the plastic out of
the channel.
Step Two
R
ELEASE
W
INDSHIELD
L
ATCHES
Step Three
R
ELEASE
R
EAR
C
ORNERS
Release the rear corners of the top. Pull gently
down and then out to release the plastic strip
from the retainer on the vehicle.
Pull down and then out
to release the fabric from
the retainer
Step Four
R
ELEASE
R
EAR
B
OW
Use a phillips screwdriver to remove the four
screws that attach the fl ap in the top to the rear
bow. Set the screws aside to be reused later.
Allow the bow to drop onto the tailgate.
Release Plastic Strips
from Retainers
Windshield
Frame
Windshield
Header Latch Pull lever up
Release hook
from loop
Unscrew the fabric
from the rear bow
View from inside vehicle
Rear Window
Opening