Pavement Ends 41504 Sun Cap - Manual

41504 pg 1
Rev. C 0710
Installation Tips
After completing the installation, keep these instructions
for future reference. Before you begin installing this
product, read all instructions thoroughly. Below are a
few tips to make this installation easier.
For a smooth fit:
For ease in installation, this product should be installed
at temperatures above 72 F. Below this temperature,
the fabric may contract an inch or more, making it
difficult to fit to the vehicle.
It is normal for the fabric to contract and wrinkle when
stored in the shipping carton. Within a few days after
the installation, the fabric will relax and the wrinkles will
disappear.
WARNING
This product is designed to enhance the appearance of the
vehicle and to shield the occupants from ordinary weather con-
ditions. Do not rely in any way on the components of this product
to contain occupants within the vehicle, or to protect against
injury or death in the event of an accident. This top will not protect
the occupants from falling objects. Never operate vehicle in
excess of manufacturer’s specifications.
WEAR SEAT BELTS AT ALL TIMES
Read and follow, precisely, all installation instructions provided
when installing top. Failure to do so may result in a poor fitting
top and could place occupants of the vehicle in a potentially
dangerous situation. After installing or reinstalling the top,
check to make sure it has been properly installed.
Sun Cap
Installation Instructions
For: Wrangler 1986 - 1991 Part Number: 41504
Important Note: If your vehicle has not been fitted with a factory soft top or has snaps on the
windshield, it will be necessary to purchase a Windshield Channel Kit Number 45809-01 from
your local distributor.