NTi Audio Minilyzer ML1 User Manual
Page 50
50
Technical Specification
signal balance error Indication range 0.0 % to 100 %
Deviation from perfect balance in % or *1
sweep
Frequency Sweep: Level as function of
frequency.
Time Sweep: Measurement of level, THD+N
and frequency as function of time.
1/3
rd
Octave
Spectrum acc. IEC 1260, class II and ANSI
S1.11-1976, class II from 50 Hz to 20 kHz,
Bargraph for Level
RMS
20 Hz to 20 kHz
scope
Auto triggering, auto ranging, auto scaling
filters
Linear, A-weighting, C-weigting, C-message,
Highpass 22 Hz / 60 Hz / 400 Hz, X-Curve
-1
,
Voice bandpass
Input Connectors
XLR balanced, RCA unbalanced
Input Impedance
40 kOhm balanced, 20 kOhm unbalanced
Input rMs
1
( upper meas. limit )
balanced
+20 dBu (7.75 V
RMS
)
unbalanced +14 dBu (3.8 V
RMS
)
Max. DC Input
± 50 V
DC
residual Noise
< 12 μV, XLR-input shorted
Microphone Input (for Polarity measurement only)
Omnidirectional
Monitor output
Jack 3.5 mm (1/8“), suitable for all common
headsets
display
Graphic LCD 64 x 100 pixel, with backlight
batteries
3x AA package dry batteries (alkaline)
Typical battery lifetime > 16 hrs
Dimensions (L x W x H)
163 x 86 x 42 mm (6.4“ x 3.38“ x 1.63“)
Weight
300 g (10.5 oz) incl. batteries
Temperature
0° to +45° C (32° to 113° F)
Humidity
< 90 % R.H., non condensing
1
for input levels > 20 dBu (balanced) the ML1 Adapter -20 dB is
available