NTi Audio Minilyzer ML1 - Manual (Page 11)

11
Power ON/OFF - Backlight
The yellow, oval-shaped key on the right hand side has the following
functions:
• Device on, press and hold it for at least one second to turn the
unit on.
• Backlight, press it shortly to activate the backlight.
• Device off, press and hold it for at least two second to turn the
unit off.
The Minilyzer will start up in the same mode (e.g. measurement
function) and with the same settings as it was switched off the last
time. In case the setup screen has been selected at switching off the
unit, the previous measurement function will be entered.
The backlight may be activated at any time, without affecting the
settings of the unit.
Please note that the ML1 has independent auto power off functions for
main power and the backlight. These may be adjusted separately.
escape
The yellow key on the left-hand side labeled ESC, activates the
escape (exit) function and may be selected at any time. Depending
on the instrument status, pressing the ESC-key performs the following
functions:
• No menu is open, the cursor returns to its default position (top
left field).
• A selection menu is open, the menu gets closed, resetting the
unit to the status in which it was opened.
• In the SETUP mode, the executed changes are saved and the
previous measurement mode is recalled.
In other terms, by pressing the ESC-key maximum twice, the unit
is reset to the last active status and the cursor returns to its default
position.
Basic Operation