Resetting to the factory settings, Reloading wav-files, Trouble shooting – NTi Audio Digirator DR2 User Manual
Page 51

51
Trouble Shooting
Resetting to the factory settings
If the Digirator reacts unexpectedly, a reset to the factory set-
tings might solve the problem.
1. Switch the instrument off.
2. Hold down the “esc” button and simultaneously operate
the “On/Off” button.
The confirmation of the reset is displayed on the screen.
Reloading wav-files
You can reload the Wave, Dolby and DTS files of the DR2 that
were installed at the factory. The files are available on the Test
signal backup DVD.