NTi Audio Digirator DR2 - Manual (Page 36)

Linear PCM Test Signals
36
Selecting a wav-file
1. Use the rotary wheel to select the file symbol 2 .
2. Confirm with “Enter”.
3. Select the desired wav-file with the rotary wheel.
4. Confirm with “Enter”.

The wav-file will be played.
Loading your own wav-files
Wave files for the DR2 must conform to the following require-
ments:
• 48 kHz sampling frequency
• Mono or Stereo
• 16 - 24 bit definition
If a wave file does not meet the
requirements, the playback stops
and the “mute” button lights up
continuously red.
To load WAV-files, you will need a computer
with the following minimum specifications:
• PC with Windows 98SE
• Macintosh computer with OSX
• Available USB port
1. Connect the DR2 to the computer via USB.

The DR2 appears on your computer as a removable data
storage medium.
2. Open the “WAVE” sub-folder on the removable medium
All the sub-folders in the “Wave” folder
now appear in the folder selection
1 . You
may add additional sub-folders to this folder
level as required.