NTi Audio Digirator DR2 - Manual (Page 21)

21
Operation
Setting the sensitivity of the rotary wheel
You can set up the sensitivity (step size) of the rotary wheel. To
do this, proceed as follows:
1. Select Level or Frequency with the rotary wheel.
2. Hold down the “sens” button.

The current sensitivity of the rotary wheel
will be displayed 1 .
3. Turn the rotary wheel to set up the desired sensitivity.
4. Release the “Sens” button to accept the desired sensitiv-
ity.

You have now changed the sensitivity of the rotary wheel.
1