NTi Audio Digirator DR2 - Manual (Page 18)

Operation
18
4. Operation
Switching Digirator on and off
Switching the Digirator on
To switch the Digirator on, press the “On/Off” button. The dis-
play lighting is switched on.
Switching the Digirator off
To switch the Digirator off, press the “On/Off” button and hold
it down for one second.
Navigation in the menu bar
The menu bar is divided into three parts. On the left-hand side,
you can choose between the Generator, Transparency-Test, I/O
Delay (Latency) and System functions.
1. To do this, select the left side of the menu bar with the rotary
wheel and confirm with “Enter”.

A selection window opens.
2. Select the desired function with the rotary wheel.
3. Confirm the selection with “Enter”.

You have now selected the desired function.
In the middle section of the menu bar you may mute or invert
individual channels of the output signal. In the right-most menu
you can save and recall configurations (see “Configurations”).