Securing the load frame, Securing the load frame 29, N; see – MTS Criterion Series 60 User Manual
Page 29
Handling the Load Fame
MTS Criterion™ Series 60
29
5. Secure the load frame to the foundation; see
Securing the Load frame
To secure the load frame to the foundation:
1. Put the anchor bolts into the bolt holes; the top of the bolts should be lower
than the top of the foundation.
2. Align the anchor bolt holes on the load frame base with that of the
foundation, and slowly put down the load frame.
3. Put the anchor bolts, which are in the foundation anchor bolt holes, through
the load frame anchor bolt holes. Put the flat washers, spring washers, and
nuts on the bolts leaving 2-4 threads of the bolts on top of the nuts.
4. Center the anchor bolts and grout the anchor holes with cement mixtures.
Keep the anchor bolts at the center of the holes while grouting.
5. Grout the cement mixture to the same level of the groundwork and scrape it
plane. After curing the foundation for a while, tighten the anchor bolt nuts.
Supporting
Wood
Do not exceed 30
o
- Series 111 Accumulator (40 pages)
- Series 249G2 Swivels (34 pages)
- Series 201 Actuators (40 pages)
- Series 215 Rotary Actuator (68 pages)
- Series 242 Actuators (40 pages)
- Series 244 Actuators (68 pages)
- Series 247 Actuators (40 pages)
- Series 248 Actuators (46 pages)
- 709 Alignment System (158 pages)
- Series 609 Alignment Fixture (70 pages)
- 494 Controller Hardware FT 40 (344 pages)
- ReNew Technical Reference (50 pages)
- DCPD Measurement System (46 pages)
- Bionix EnviroBath (40 pages)
- FGW900 High-temperature Furnace (38 pages)
- Model 409.83 Temperature Controller (40 pages)
- Series 651 Environmental Chambers (30 pages)
- Series 653 High-Temperature Furnaces (38 pages)
- Series 658 Environmental Chamber (24 pages)
- Series FEC Environmental Chamber (48 pages)
- Model 685.53 Grip Control Module (24 pages)
- Series 685 Hydraulic Grip Supply (48 pages)
- Bend Fixture-10 kN (2 pages)
- Grip-Manual Bend Fixture-100 kN (2 pages)
- Grip-Manual Bollard-2 kN (2 pages)
- Grip-Manual Bollard-500 N (2 pages)
- Compression Platen-100 kN-100mm (2 pages)
- Compression Platen-100 kN-150mm (2 pages)
- Compression Platen-100 kN-200mm (2 pages)
- Compression Platen-20 kN (2 pages)
- Compression Platen-20 kN-100mm (2 pages)
- Compression Platen-20 kN-200mm (2 pages)
- Compression Platen-20 kN-SST (2 pages)
- Compression Platen-500 N FYC502A (2 pages)
- Compression Platen-500 N FYB502A (2 pages)
- Compression Platen-500 N-50mm (2 pages)
- Grip-Pneumatic Vise-Style-1 kN (2 pages)
- Pneumatic Bollard-500 N (2 pages)
- Scissor-Style-2 kN (2 pages)
- Scissor-Style-5 kN (2 pages)
- Screw-Style-5 kN (2 pages)
- Screw-Style-5 kN-SST (2 pages)
- Bend Fixture-1000 kN (2 pages)
- Bend Fixture-300 kN (2 pages)
- Bolt Grips (32 pages)