MTS Multipurpose Elite Test - Manual (Page 100)

Manual Controls Window
Manual Controls Window
Description Item
Selects the control channel. Channel
Click the Channel button to toggle between individual channels and a
Master Command Group.
Selects a control mode. Control Mode
Select the Enable Manual Command check box to make a selected
control mode the Active Mode.
Shows the current control mode. Active Mode
Applies the manual command to the actuator. Manual Cmd
If necessary, click the Manual Cmd text to open a window where you
can change the slider-bar range.
Selecting a Master Command Group that has individual channels at
different Manual Cmd values changes this control. It shows the highest
and lowest Manual Cmd values for the group. It also shows pointers that
indicate the highest and lowest Manual Cmd values. Pointers lock
together once they have been used to move the group to a common
Manual Cmd value.
Enables the manual command. Closing the Manual Command window
disables this command. Enable Manual Command
Sets Park and Ride level levels for vehicle testing. Rig Commands (Optional)
Moves enabled channels to a predefined Park level prior to hydraulic
shutdown. Park
100 Multipurpose Elite Test Design Guide
7.0 MTS Controller Software